SerialPlate / Error codes / Bosch induction slide-in range
Bosch induction slide-in range error codes
8 codes. 3 are ones you can usually clear yourself, and 3 are ones Bosch says need a technician.
Tell us the code and we'll check it against your exact model, its age and any recalls.
| Code | What it means |
|---|---|
| dE | The range is in demo mode, so the cooking zones don't heat. Not a fault |
| E9000 | The supply voltage is outside the range the cooktop can work with. Needs a technician · also shown as E9010 |
| E9011 | The range isn't connected to the power properly. Needs a technician |
| F1 | A cooking zone overheated and switched itself off to protect the surface. You can usually clear it · also shown as F6 |
| F2 | The electronics overheated and switched a cooking zone off. You can usually clear it · also shown as F4, E7015 |
| F5 | Hot cookware is too close to the control panel, and the electronics are at risk of overheating. You can usually clear it |
| F8 | A cooking zone ran for a long time with nothing changed, so the automatic time limit switched it off. Not a fault |
| U400 | The supply voltage is outside the range the cooktop can work with. Needs a technician |
Worth knowing
These are the codes Bosch lists for the induction cooktop on its slide-in ranges. Any E with a number and a beep that isn't listed here is an electronics fault that needs service.
Meanings read from Bosch owner support: slide-in range error codes and written in our own words. Last checked 11 November 2026. Codes differ between models; your manual lists the ones for yours. Shown as: dE; E9000 or E9010; E9011 and so on.