SerialPlate
SerialPlate / Error codes / Frigidaire electric range

Frigidaire electric range error codes

9 codes. 0 are ones you can usually clear yourself, and 9 are ones Frigidaire says need a technician.

Take a photo of the label

Tell us the code and we'll check it against your exact model, its age and any recalls.

CodeWhat it means
F1A key on the keypad is shorted.
Needs a technician
F10The oven is heating beyond the temperature it was set to and not stopping.
Needs a technician
F12A fault in the oven control's own electronics. Frigidaire calls it micro identification.
Needs a technician
F13The control's memory chip has failed.
Needs a technician
F3The range's electronics have stopped communicating.
Needs a technician · also shown as F20
F30The control reads the probe circuit as open.
Needs a technician
F31The control reads the probe circuit as shorted.
Needs a technician
F40The cooktop has locked itself out.
Needs a technician · also shown as F41
F90There is a problem with the door lock.
Needs a technician · also shown as F91, F92, F93, F94

Worth knowing

Frigidaire gives a short label for each code and the same reset for all of them. If the range was installed in the last 30 days it says to go back to the installer; otherwise to book service.

Meanings read from Frigidaire owner support: ranges error code guide and written in our own words. Last checked 11 November 2026. Codes differ between models; your manual lists the ones for yours. Shown as: F1; F10; F12 and so on.