SerialPlate / Error codes / Frigidaire top-load washer
Frigidaire top-load washer error codes
7 codes. 6 are ones you can usually clear yourself, and 0 are ones Frigidaire says need a technician.
Tell us the code and we'll check it against your exact model, its age and any recalls.
| Code | What it means |
|---|---|
| E1 | Water isn't entering the washer, or it is filling too slowly. You can usually clear it |
| E2 | The water is taking too long to drain. You can usually clear it |
| E3 | The lid is open, or the lid lock failed. You can usually clear it |
| E4 | The washer is out of balance during the spin. You can usually clear it |
| E5 | The washer isn't level. You can usually clear it |
| F2 | There are too many suds, which can leak or overflow. You can usually clear it |
| CL | The lid was open for more than 20 seconds while Control Lock was on. Not a fault |
Worth knowing
Frigidaire has a separate article for each code. If the washer was installed or moved in the last 30 days, it says to go back to the installer first.
Meanings read from Frigidaire owner support: washer articles and written in our own words. Last checked 11 November 2026. Codes differ between models; your manual lists the ones for yours. Shown as: E1; E2; E3 and so on.