LG dishwasher error code IE
Not enough water is reaching the tub.
We'll check IE against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- The water is off
- A bent or squashed inlet hose
- An inlet valve left closed after installation
You can usually clear it
- Check that the kitchen tap has water.
- Make sure the inlet hose isn't bent or pressed by anything.
- Under the sink, check that the dishwasher's inlet valve and the shut-off valve are both open.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
Other LG dishwasher codes
AEThe dishwasher has detected a leak, or more water than it sh…OEThe tub isn't draining fully.TEThere is a problem with the temperature sensor.HEThe water isn't being heated.LEThere is a problem with the motor that pumps the wash water.PEThere is a problem with the water level sensor.BEToo many suds have built up.NEThe pump that sends water to the spray arms isn't turning as…
Meaning read from LG support: dishwasher guide to error codes and written in our own words. Last checked 11 November 2026. LG notes that codes can differ between models.