SerialPlate
SerialPlate / Error codes / LG refrigerator

LG refrigerator error codes

22 codes. 3 are ones you can usually clear yourself, and 17 are ones LG says need a technician.

Take a photo of the label

Tell us the code and we'll check it against your exact model, its age and any recalls.

CodeWhat it means
FFThe freezer fan isn't turning.
You can usually clear it · also shown as Er FF, E FF
rFThe fan in the refrigerator compartment isn't turning.
Needs a technician · also shown as Er rF, E rF
CFThe fan that cools the compressor area at the back isn't running. The code often clears after a reset and returns about three hours later.
Needs a technician · also shown as Er CF, E CF
IFThe ice maker's fan isn't turning.
Needs a technician · also shown as Er IF
dHThe defrost system isn't working: the temperature didn't rise as expected after a defrost began.
Needs a technician · also shown as FdH, dHF, r dH, Er dH
COThe main board and the display have stopped communicating.
Needs a technician · also shown as Er CO, C0
C1The dispenser and the display have stopped communicating.
Needs a technician
FSThe freezer's temperature sensor has a fault.
Needs a technician · also shown as Er FS
rSThe upper temperature sensor in the refrigerator compartment has a fault.
Needs a technician · also shown as Er rS
r2The lower temperature sensor in the refrigerator compartment has a fault.
Needs a technician
dSThe defrost sensor has a fault. The cooling plate may be iced over.
Needs a technician · also shown as Er dS
rTThe sensor that reads the room temperature has a fault.
Needs a technician
ISThe ice maker's sensor has a fault, so ice making may stop.
Needs a technician · also shown as Er IS
ItThe ice maker's motor has a fault.
Needs a technician
SSThe water tank's sensor has a fault.
Needs a technician
ttThe refrigerator can't detect its water tank.
Needs a technician
FUThe freezer isn't getting cold enough, either soon after starting or while running.
You can usually clear it
gFThe refrigerator isn't sensing water flowing in.
You can usually clear it · also shown as Er gF
CHThe sensors point to a leak on the high-pressure side of the cooling circuit.
Needs a technician
CLThe sensors point to a leak on the low-pressure side of the cooling circuit.
Needs a technician
LoThe room is too cold (below 14°F) for the refrigerator to work properly.
Not a fault
HIThe room is too hot (above 122°F) for the refrigerator to work properly.
Not a fault

Worth knowing

Displays usually show these after Er or E, such as Er FF. LG warns owners not to take the refrigerator apart, and to stop using it and call if a code returns after a reset.

Meanings read from LG support: refrigerator digital and analog error codes and written in our own words. Last checked 11 November 2026. Codes differ between models; your manual lists the ones for yours. Shown as: FF or Er FF or E FF; rF or Er rF or E rF; CF or Er CF or E CF and so on.