Maytag top-load washer error code LID
The lid was left open.
We'll check LID against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- An open lid
Not a fault
- Close the lid. If it was open for more than 10 minutes the washer will have drained, so start the cycle again without adding detergent.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
Other Maytag top-load washer codes
OFBThe load is off balance, and the washer is trying to correct…OLThe load is too large.PFA power cut interrupted the cycle.SUDThere are too many suds in the washer.LFThe washer is taking too long to fill.HCThe hot and cold inlet hoses are connected the wrong way rou…DRNThe washer isn't draining properly.LDLThe lid isn't locking.
Meaning read from Maytag product help: error codes in top load HE washers and written in our own words. Last checked 11 November 2026. These are for Maytag's high-efficiency top-load washers, which are built by Whirlpool and show the same codes. For an F and E code, Maytag says to press Start/Pause to clear it and book service if it returns.