Samsung dishwasher error code LC or LE
The leak sensor has found moisture. The dishwasher turns itself on and keeps trying to drain.
We'll check LC against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- A leak
- Water backing up from the sink or disposal
- On Waterwall models, a blocked reflector
Needs a technician
Samsung says this one needs a technician. It suggests trying this first:
- Look for water around the base and under the sink.
- Check that the sink or disposal isn't backing water into the dishwasher.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
The problem behind it
Other Samsung dishwasher codes
3CThe pump has stopped working properly.3EThe water coming in is too hot.4CThe dishwasher isn't getting water at the pressure or temper…5CThe dishwasher can't drain.7EOn Waterwall models, the moving reflector at the bottom of t…9EThere isn't enough water in the dishwasher.APThe dishwasher is in Access Point mode, waiting to connect t…BEThe control panel thinks a button is stuck.
Meaning read from Samsung support: dishwasher is displaying an error code and written in our own words. Last checked 11 November 2026. Older models show an E where newer ones show a C, so 4E and 4C mean the same thing.