LG oven not heating
An electric oven that will not heat usually has a failed bake element, and a gas oven usually has a weak igniter. Both are a technician's job. Before you call, check the breaker, make sure the oven is not on a delayed start or in demo or Sabbath mode, and on a gas range see whether the top burners still light.
First: If you smell gas, stop. Leave the house and call your gas company or 911 from outside.
We'll work out which of these fits your exact model, and whether it is safe to fix yourself.
What a LG shows for this
If the display shows a code, it narrows the cause down. LG uses these 6 codes when a oven is not heating.
| Code | What it means | LG says |
|---|---|---|
| F1 | The upper oven's temperature sensor has a fault. | Needs a technician |
| F4 | The lower oven's temperature sensor has a fault. | Needs a technician |
| F6 | The upper oven has a heating fault. | Needs a technician |
| F9 | The upper oven isn't heating properly. | Needs a technician |
| F16 | The oven's temperature sensor has a problem. | Needs a technician |
| F19 | The oven has a heating fault. | Needs a technician |
Codes differ between models. No code on the display? The checks below still apply.
What to check first
These are in rough order of how often they are the cause. Each can be checked without opening the oven up.
- A half-tripped breaker (electric ovens). The clock and light work, but the oven and sometimes the cooktop do not heat.
An electric range runs on two breakers joined together. Switch the range's breaker fully off, then back on. - A delayed start or timed cook. The display shows Delay, or a start time, and the oven stays cold.
Press Cancel or Clear, then set Bake and a temperature without using the timer buttons. - Demo, Sabbath or control lock. The display works but nothing heats, or it shows a padlock, SAb or Demo.
Look up how to turn off demo mode, Sabbath mode and the control lock for your model. Each is usually a button held for a few seconds. - The temperature is off, not absent. The oven heats, but food takes much longer or burns.
Check it with an oven thermometer. Most ovens let you adjust the temperature by up to 35°F in the settings; your manual shows how.
What needs a technician
If the checks above change nothing, it is usually one of these. They mean opening the oven up, which is not a job to do yourself.
- No gas reaching the range (gas ovens). The top burners will not light either.
- A weak igniter (gas ovens). You see a glow at the bottom of the oven but no flame, or it takes minutes to light.
- A failed bake element (electric ovens). The element at the bottom stays dark, or has a blister, a crack or a break in it. The broiler may still work.
- A failed temperature sensor. The temperature swings widely, or the display shows a sensor code.
- A blown thermal fuse. The oven went dead during or just after a self-clean cycle.
- A failed control board or relay. The element and the supply are sound, and the oven still will not heat or will not stop.
Stop and call someone if
- You smell gas.
- An element sparks, or glows in one spot only.
- The oven will not switch off: turn it off at the breaker.
Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
More on LG
Other makers
The causes on this page were written with AI from general repair knowledge and have not yet been reviewed by a technician. Code meanings read from LG support: range error codes list and written in our own words. Last checked 11 November 2026. SerialPlate gives guidance, not a guarantee.