Frigidaire refrigerator ice maker not working
When an ice maker stops, it is usually switched off, the freezer is too warm, the water filter is clogged, or the water line is shut or kinked. Check those first and give it a full day to catch up. If water reaches the fridge and the freezer is at 0°F but no ice comes, the ice maker or its water valve has failed.
We'll work out which of these fits your exact model, and whether it is safe to fix yourself.
What a Frigidaire shows for this
If the display shows a code, it narrows the cause down. Frigidaire uses this code when a refrigerator is ice maker not working.
| Code | What it means | Frigidaire says |
|---|---|---|
| DI SP | Ice is jammed in the dispenser chute. A tone sounds if a cube stays stuck too long. | You can usually clear it |
Codes differ between models. No code on the display? The checks below still apply.
What to check first
These are in rough order of how often they are the cause. Each can be checked without opening the refrigerator up.
- The ice maker is switched off. No ice at all, and the control panel shows Ice Off, or the metal arm is raised.
Turn the ice maker on at the control panel or its own switch. If it has a metal arm, lower it. - The freezer is too warm. Ice is slow, small or hollow, and frozen food feels soft.
Set the freezer to 0°F (-18°C). Give it 24 hours before judging. - A clogged water filter. The water dispenser has slowed down too, or the filter light is on.
Replace the water filter the way your manual shows. Most need changing every six months. - The water supply is shut or the line is kinked. No water from the dispenser either. It often follows moving the fridge.
Check that the small shut-off valve on the water line is fully open, and that the line behind the fridge is not kinked or crushed. - Ice jammed in the tray or the chute. You can see cubes stuck together or frozen in place.
Take out the ice bin, break up and remove any clumps, and put it back fully. Use your hands or a plastic spoon, nothing sharp. - It is new or was just switched on. The fridge was installed, moved or turned on in the last day.
Wait. A new ice maker can take 24 hours to make its first batch, and you should throw the first few batches away.
What needs a technician
If the checks above change nothing, it is usually one of these. They mean opening the refrigerator up, which is not a job to do yourself.
- A frozen fill tube. The freezer is cold and the supply is open, but no water reaches the tray.
- A failed water inlet valve. No water reaches the ice maker or the dispenser, with the supply open and a new filter.
- A failed ice maker. Water and temperature are fine, and the ice maker never cycles.
Stop and call someone if
- Water is leaking onto the floor: close the shut-off valve on the water line.
- You smell something chemical or see an oily film inside the fridge.
Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
More on Frigidaire
Other makers
Other refrigerator problems
The causes on this page were written with AI from general repair knowledge and have not yet been reviewed by a technician. Code meanings read from Frigidaire owner support: refrigerator error codes and alarms guide and written in our own words. Last checked 11 November 2026. SerialPlate gives guidance, not a guarantee.