SerialPlate
SerialPlate / Error codes / Bosch dishwasher

Bosch dishwasher error codes

22 codes. 6 are ones you can usually clear yourself, and 16 are ones Bosch says need a technician.

Take a photo of the label

Tell us the code and we'll check it against your exact model, its age and any recalls.

CodeWhat it means
E01The control board has found a fault in the heat pump motor circuit.
Needs a technician
E02The control board has found a fault in one of its relays.
Needs a technician
E03The control board has found a fault in one of its relays.
Needs a technician
E04The self-test found a fault in the heater's electronics.
Needs a technician
E05The control board has found a fault in the circuit that switches water between the spray arms.
Needs a technician
E06The control board has found a fault in the door sensor circuit.
Needs a technician
E07The fan for the Crystal Dry (zeolite) drying system has failed.
Needs a technician
E09The heater inside the heat pump has a fault, so the water isn't being heated.
Needs a technician
E10The heater for the Crystal Dry (zeolite) drying chamber has a fault.
Needs a technician
E12Limescale has built up in the heat pump.
You can usually clear it
E14The dishwasher can't measure the water coming in, or water isn't reaching it properly.
Needs a technician
E15A safety switch has found water in the base of the dishwasher, and the leak protection has shut it down.
Needs a technician
E16Water isn't flowing into the dishwasher the way it should.
You can usually clear it · also shown as E17
E18The water level is too low, or water isn't being pumped around properly.
You can usually clear it
E19The control board has found a fault in the circuit that opens the detergent dispenser.
Needs a technician
E20The heater inside the heat pump has a fault.
Needs a technician
E21The heat pump is blocked.
Needs a technician
E22Water can't get through the filter at the bottom of the tub.
You can usually clear it
E23The drain pump is blocked, clogged or has failed.
Needs a technician
E24The dishwasher isn't draining.
You can usually clear it
E25The drain pump is blocked, or its cover is loose or missing.
You can usually clear it
E27The power reaching the dishwasher is too low.
Needs a technician

Worth knowing

Some displays show these with a dash, such as E-24. Newer models also show four-digit codes, which are not listed here.

Meanings read from Bosch owner support: dishwasher error codes and written in our own words. Last checked 11 November 2026. Codes differ between models; your manual lists the ones for yours. Shown as: E01; E02; E03 and so on.