Bosch dishwasher error code E09
The heater inside the heat pump has a fault, so the water isn't being heated.
We'll check E09 against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- A failed heater in the heat pump
Needs a technician
Bosch says this one needs a technician. It suggests trying this first:
- Switch the dishwasher's breaker off for 30 seconds, then back on.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
Other Bosch dishwasher codes
E01The control board has found a fault in the heat pump motor c…E02The control board has found a fault in one of its relays.E03The control board has found a fault in one of its relays.E04The self-test found a fault in the heater's electronics.E05The control board has found a fault in the circuit that swit…E06The control board has found a fault in the door sensor circu…E07The fan for the Crystal Dry (zeolite) drying system has fail…E10The heater for the Crystal Dry (zeolite) drying chamber has …
Meaning read from Bosch owner support: dishwasher error codes and written in our own words. Last checked 11 November 2026. Some displays show these with a dash, such as E-24. Newer models also show four-digit codes, which are not listed here.