SerialPlate
SerialPlate / Error codes / GE range or wall oven / ERR

GE range or wall oven error code ERR

The control was given a setting it can't accept. It can also mean the oven is set to Celsius, which stops it going above 290.

Take a photo of the label

We'll check ERR against your exact model, its age and any recalls, and tell you what to do next.

What it usually points to

Not a fault

  1. Press Clear/Off and enter the setting again.
  2. To check the Celsius setting, hold Bake and Broil together for three to five seconds until SF shows, then follow your manual.

These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.

Other GE range or wall oven codes

All 14 GE range or wall oven codes

Meaning read from GE Appliances support: range and wall oven error, fault or function codes and written in our own words. Last checked 11 November 2026. GE calls this a summary of its most common codes and says it can't list them all. Until a fault is repaired, it says to leave the oven's breaker off, switching it on only while you use the surface units.