SerialPlate / Error codes / GE range or wall oven
GE range or wall oven error codes
14 codes. 2 are ones you can usually clear yourself, and 9 are ones GE says need a technician.
Tell us the code and we'll check it against your exact model, its age and any recalls.
| Code | What it means |
|---|---|
| F0 | Usually a problem with the key panel. Needs a technician · also shown as F1, F6, F7 |
| F3 | Usually the oven's temperature sensor. Needs a technician · also shown as F4 |
| F5 | Usually the electronic control. Needs a technician · also shown as F8, FF |
| F2 | The oven got hotter than the control allows, for a reason it couldn't identify. Needs a technician · also shown as F20 |
| F350 | Usually a problem with the upper cooling fan. Needs a technician |
| F9 | A part in the door lock circuit has failed. Needs a technician · also shown as FC |
| FD | A problem with the meat probe or its socket. Needs a technician |
| F96 | Usually an internal part that needs replacing. Needs a technician · also shown as F97 |
| Bad Line | The range has power but is wired incorrectly. Needs a technician |
| Unlock Door | The door won't unlock after a self-clean cycle. You can usually clear it |
| LOC DOOR | If it flashes when you haven't chosen self-clean, the controls are locked or the control needs a reset. You can usually clear it |
| LOC | The child lockout is on, which stops the oven being turned on by accident. Not a fault |
| ERR | The control was given a setting it can't accept. It can also mean the oven is set to Celsius, which stops it going above 290. Not a fault |
| OFF | The oven is too hot to start self-clean, or still too hot after self-clean to bake. Not a fault |
Worth knowing
GE calls this a summary of its most common codes and says it can't list them all. Until a fault is repaired, it says to leave the oven's breaker off, switching it on only while you use the surface units.
Meanings read from GE Appliances support: range and wall oven error, fault or function codes and written in our own words. Last checked 11 November 2026. Codes differ between models; your manual lists the ones for yours. Shown as: F0 or F1 or F6 or F7; F3 or F4; F5 or F8 or FF and so on.