GE range or wall oven error code Unlock Door
The door won't unlock after a self-clean cycle.
We'll check Unlock Door against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- A door lock that hasn't released
You can usually clear it
- Let the oven cool completely.
- Cut power to the range for 30 seconds, restore it and try the door.
- If it is still locked and the oven is empty, set a self-clean for one to two hours, then let it cool for about 30 minutes and try again.
- Never force the latch.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
Other GE range or wall oven codes
F0Usually a problem with the key panel.F3Usually the oven's temperature sensor.F5Usually the electronic control.F2The oven got hotter than the control allows, for a reason it…F350Usually a problem with the upper cooling fan.F9A part in the door lock circuit has failed.FDA problem with the meat probe or its socket.F96Usually an internal part that needs replacing.
Meaning read from GE Appliances support: range and wall oven error, fault or function codes and written in our own words. Last checked 11 November 2026. GE calls this a summary of its most common codes and says it can't list them all. Until a fault is repaired, it says to leave the oven's breaker off, switching it on only while you use the surface units.