SerialPlate
SerialPlate / Error codes / KitchenAid dishwasher

KitchenAid dishwasher error codes

17 codes. 5 are ones you can usually clear yourself, and 12 are ones KitchenAid says need a technician.

Take a photo of the label

Tell us the code and we'll check it against your exact model, its age and any recalls.

CodeWhat it means
F1 E1A fault in the control module.
Needs a technician
F1 E2The main control has a communication fault.
Needs a technician · also shown as F2 E2
F2 E1A key is stuck, or the console has a fault.
Needs a technician
F3 E2A fault with the water temperature sensor or the sensor that checks how dirty the water is.
Needs a technician
F4 E2A fault in the heating system.
Needs a technician · also shown as F4 E3
F6 E1A fault in the control panel or the main control.
Needs a technician
F6 E3The dishwasher detected too many suds, so it may not fill or wash properly.
You can usually clear it
F6 E4The float switch that guards against overfilling has been set off.
You can usually clear it
F7 E2A fault with the wash motor.
Needs a technician
F8 E2An electrical fault with the valve that lets water in.
Needs a technician
F8 E4Water was detected in the tray under the dishwasher. It starts draining and won't run.
Needs a technician
F8 E5The valve that lets water in is stuck open.
Needs a technician
F9 E1Draining is taking too long, or the dishwasher isn't draining.
You can usually clear it
F9 E2A fault with the drain motor, or a blocked drain.
You can usually clear it
FA E4A fault with the valve that switches water between the spray arms.
Needs a technician · also shown as F10 E4
FA E5The valve that switches water between the spray arms is leaking.
Needs a technician · also shown as F10 E5
H2OThe dishwasher isn't detecting water coming in.
You can usually clear it · also shown as H20

Worth knowing

KitchenAid dishwashers are built by Whirlpool and show the same codes. On models without a display, the Clean light flashes the code: count the first set of flashes for the F number, then after a short pause the second set for the E number.

Meanings read from KitchenAid product help: dishwasher error codes and written in our own words. Last checked 11 November 2026. Codes differ between models; your manual lists the ones for yours. Shown as: F1 E1; F1 E2 or F2 E2; F2 E1 and so on.