SerialPlate
SerialPlate / Error codes / KitchenAid dishwasher / F9 E1

KitchenAid dishwasher error code F9 E1

Draining is taking too long, or the dishwasher isn't draining.

Take a photo of the label

We'll check F9 E1 against your exact model, its age and any recalls, and tell you what to do next.

What it usually points to

You can usually clear it

  1. Take out the filter at the bottom of the tub and wash it under running water.
  2. Check the drain hose under the sink for kinks, pinches or clogs.
  3. Run the garbage disposal to clear it. If the disposal is new, check its knockout plug was removed.
  4. If there is an air gap on the sink, take off its cap and clear it.
  5. Cut the power for 30 seconds: unplug the dishwasher, or switch its breaker off if it is wired in.

These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.

The problem behind it

Other KitchenAid dishwasher codes

All 17 KitchenAid dishwasher codes

Meaning read from KitchenAid product help: dishwasher error codes and written in our own words. Last checked 11 November 2026. KitchenAid dishwashers are built by Whirlpool and show the same codes. On models without a display, the Clean light flashes the code: count the first set of flashes for the F number, then after a short pause the second set for the E number.