SerialPlate
SerialPlate / Error codes / LG front-load washer

LG front-load washer error codes

31 codes. 12 are ones you can usually clear yourself, and 14 are ones LG says need a technician.

Take a photo of the label

Tell us the code and we'll check it against your exact model, its age and any recalls.

CodeWhat it means
OEThe washer can't drain.
You can usually clear it · also shown as E03, E21
IEThe tub didn't fill with enough water in the time allowed.
You can usually clear it · also shown as E02, E10
UEThe laundry is piled to one side, so the washer can't spin safely.
You can usually clear it
CLChild Lock is on.
Not a fault
LEThe motor can't turn the drum properly.
You can usually clear it
tCLA reminder that it is time to run Tub Clean.
Not a fault
dEThe door couldn't lock because it isn't closed properly.
You can usually clear it · also shown as dE1, E01
dE2The door is closed but didn't lock.
You can usually clear it · also shown as E30
CEToo much current is flowing in the motor circuit.
Needs a technician
SudThere are too many suds, so the washer has added a suds-clearing stage of about two hours.
You can usually clear it
CdThe washer is cooling down after a drying cycle. The drum keeps tumbling for up to four hours.
Not a fault
FEToo much water has entered the drum.
Needs a technician · also shown as E04, E12
PEThe water level sensor isn't working properly.
Needs a technician · also shown as E33
PFThe power was cut during a cycle.
Not a fault
tEThere is a heating fault, usually a failed temperature sensor.
Needs a technician
dHEA temporary fault in the drying function.
Needs a technician
HEA temporary fault with the water heater.
Needs a technician
SEThe washer has found a fault with one of its sensors.
Needs a technician
AEThe washer has found a leak inside and a safety switch has stopped it to prevent flooding.
Needs a technician
vSThe vibration sensor has a problem.
Needs a technician · also shown as uS, u5
FFThe washer is frozen: it is below 34°F inside, and the controls stay off until it warms up.
You can usually clear it · also shown as u51
OPnThe detergent drawer isn't fully closed, or was opened during a cycle.
You can usually clear it
Ed1The automatic dispenser isn't drawing liquid detergent.
You can usually clear it · also shown as Ed2
Ed3The automatic dispenser isn't drawing fabric softener.
You can usually clear it · also shown as Ed4
Ed5The dispenser's electronics aren't communicating properly.
Needs a technician
dcLThe automatic dispenser is running its nozzle-cleaning program, which takes about 16 minutes.
Not a fault
E80The display board and the main board have stopped communicating.
Needs a technician
nCThe display board can't communicate with the NFC module.
Needs a technician
nEThe display board can't communicate with the Wi-Fi module.
Needs a technician
nFThere is a problem with the Wi-Fi module.
Needs a technician
PSThere is a power supply problem and the washer has stopped.
You can usually clear it · also shown as P5

Worth knowing

Newer models show some of these as E and a number, listed here beside the older letters.

Meanings read from LG support: front load washer error code list and written in our own words. Last checked 11 November 2026. Codes differ between models; your manual lists the ones for yours. Shown as: OE or E03 or E21; IE or E02 or E10; UE and so on.