LG front-load washer error code IE or E02 or E10
The tub didn't fill with enough water in the time allowed.
We'll check IE against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- A closed tap
- A kinked or frozen inlet hose
- A clogged inlet filter
You can usually clear it
- Make sure the taps are fully open.
- Straighten any bent inlet hose.
- In freezing weather, wrap the tap in a towel soaked in hot water for five minutes.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
Other LG front-load washer codes
OEThe washer can't drain.UEThe laundry is piled to one side, so the washer can't spin s…CLChild Lock is on.LEThe motor can't turn the drum properly.tCLA reminder that it is time to run Tub Clean.dEThe door couldn't lock because it isn't closed properly.dE2The door is closed but didn't lock.CEToo much current is flowing in the motor circuit.
Meaning read from LG support: front load washer error code list and written in our own words. Last checked 11 November 2026. Newer models show some of these as E and a number, listed here beside the older letters.