SerialPlate
SerialPlate / Error codes / Maytag dryer

Maytag dryer error codes

17 codes. 4 are ones you can usually clear yourself, and 11 are ones Maytag says need a technician.

Take a photo of the label

Tell us the code and we'll check it against your exact model, its age and any recalls.

CodeWhat it means
AFAir isn't flowing freely through the dryer. It keeps running, but loads take longer to dry. Some models light Check Vent instead.
You can usually clear it · also shown as F4 E3
L2The dryer is getting low voltage or none on part of its supply, so the heater may not come on. The drum keeps turning.
You can usually clear it · also shown as F4 E4
PFA power failure interrupted the cycle.
Not a fault
F3 E2Five loads in a row have dried without the moisture sensors getting a reading.
You can usually clear it · also shown as F3 E5
ERRThe door isn't completely closed and latched, so the dryer won't run. It can look shut without being latched.
You can usually clear it
LocControl Lock is on, so the dryer won't start.
Not a fault
F1 E3There may be a problem with the control unit or its wiring.
Needs a technician · also shown as F1 E5
F1 E4There may be a problem with the control unit or its wiring.
Needs a technician
F2 E1A fault in the keypad.
Needs a technician
F2 E2A fault in the keypad or the control.
Needs a technician
F2 E4There may be a problem with the touch panel or its wiring.
Needs a technician
F2 E5There may be a problem with the touch panel or its wiring.
Needs a technician
F3 E1A fault with the temperature sensor on the exhaust.
Needs a technician
F3 E3A fault with the temperature sensor on the air inlet.
Needs a technician
F4 E1There may be a problem with the heater or the relays that switch it.
Needs a technician
F6 E1The main control board and the touch panel have stopped communicating.
Needs a technician
F7 E1There may be a problem with the motor, its control or the wiring.
Needs a technician

Worth knowing

Maytag dryers are built by Whirlpool and show the same codes. Maytag's own page names AF, L2 and PF, and says any F and E code needs service; the meanings of the F and E codes here come from Whirlpool's pages for the same dryers.

Meanings read from Maytag product help: error codes in dryers and written in our own words. Last checked 11 November 2026. Codes differ between models; your manual lists the ones for yours. Shown as: AF or F4 E3; L2 or F4 E4; PF and so on.