Maytag dryer error code F3 E2 or F3 E5
Five loads in a row have dried without the moisture sensors getting a reading.
We'll check F3 E2 against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- A dryer that isn't level, so clothes don't touch the sensors
- Very small loads or single items
You can usually clear it
- Press Power to clear the code.
- Check the dryer is level and adjust its feet.
- Dry a larger load, or use an automatic cycle and not Timed Dry.
- Switch the dryer's breakers off for one minute, then on. Start a timed dry cycle and watch for a minute to see if the code returns.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
Other Maytag dryer codes
AFAir isn't flowing freely through the dryer. It keeps running…L2The dryer is getting low voltage or none on part of its supp…PFA power failure interrupted the cycle.ERRThe door isn't completely closed and latched, so the dryer w…LocControl Lock is on, so the dryer won't start.F1 E3There may be a problem with the control unit or its wiring.F1 E4There may be a problem with the control unit or its wiring.F2 E1A fault in the keypad.
Meaning read from Maytag product help: error codes in dryers and written in our own words. Last checked 11 November 2026. Maytag dryers are built by Whirlpool and show the same codes. Maytag's own page names AF, L2 and PF, and says any F and E code needs service; the meanings of the F and E codes here come from Whirlpool's pages for the same dryers.