Samsung dryer error code 9C1
The voltage reaching the dryer isn't what it expects.
The same meaning is also shown as 9E, 2E, 9E1.
We'll check 9C1 against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- A dryer sharing a circuit or running on an extension cord
- On an electric dryer, a power cord fitted wrongly or the wrong supply voltage
You can usually clear it
- Make sure the dryer is on its own circuit and not on an extension cord.
- On an electric dryer, have an electrician confirm the cord is fitted correctly and the outlet gives the right voltage.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
The problem behind it
Other Samsung dryer codes
bEThe dryer thinks a button on the panel is stuck or being hel…dCThere is a problem with the door, its latch, or the sensor t…tSThere is a problem with the temperature inside the dryer or …HCThe dryer is getting too hot. Less often, the heater isn't g…ACParts inside the dryer have stopped communicating with each …FCThe frequency of the power supply isn't valid.ClgAfter a Vent Blockage test: the vent is clogged.C80After a Vent Blockage test: the vent is about 80% clogged.
Meaning read from Samsung support: dryer displays an error code and written in our own words. Last checked 11 November 2026. Samsung groups several spellings under one meaning. Older and newer models show the same fault with different letters. A character that looks like an upside-down F is a lowercase t.