SerialPlate
SerialPlate / Error codes / Samsung range or wall oven

Samsung range or wall oven error codes

7 codes. 3 are ones you can usually clear yourself, and 2 are ones Samsung says need a technician.

Take a photo of the label

Tell us the code and we'll check it against your exact model, its age and any recalls.

CodeWhat it means
dEThe oven's removable partition isn't seated properly, or cooking was started before it was put in.
You can usually clear it · also shown as dC
doorThe oven thinks its door is open.
You can usually clear it
tEStThe range is in demo mode. The oven and cooktop won't heat.
Not a fault · also shown as tE5t
bAd LinEThe power connection to the range isn't right.
Needs a technician
C-10Usually appears only during a self-diagnosis from the SmartThings app, when the oven starts very cold or very hot.
Not a fault
C-24The oven is heating up faster than it should.
You can usually clear it
C-F0The range's electronic parts have stopped communicating with each other.
Needs a technician

Worth knowing

Samsung lists only the codes an owner may be able to clear. For any other code it says to turn the range off and on, then switch the breaker off for 30 seconds, and book service if the code returns.

Meanings read from Samsung support: range or wall oven error codes and written in our own words. Last checked 11 November 2026. Codes differ between models; your manual lists the ones for yours. Shown as: dE or dC; door; tESt or tE5t and so on.