Samsung range or wall oven error code dE or dC
The oven's removable partition isn't seated properly, or cooking was started before it was put in.
We'll check dE against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- A partition that isn't pushed fully in
- Something pressing the partition switch at the back of the oven
You can usually clear it
- If the partition is in, take it out and slide it fully back in. It sits in the third rack position from the top on electric and dual-fuel models, the fourth on gas.
- If the partition is out, check nothing is pressing the switch at the back of the oven.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
Other Samsung range or wall oven codes
doorThe oven thinks its door is open.tEStThe range is in demo mode. The oven and cooktop won't heat.bAd LinEThe power connection to the range isn't right.C-10Usually appears only during a self-diagnosis from the SmartT…C-24The oven is heating up faster than it should.C-F0The range's electronic parts have stopped communicating with…
Meaning read from Samsung support: range or wall oven error codes and written in our own words. Last checked 11 November 2026. Samsung lists only the codes an owner may be able to clear. For any other code it says to turn the range off and on, then switch the breaker off for 30 seconds, and book service if the code returns.