Whirlpool front-load washer error code SUD or SD
There are too many suds for the washer to spin the water out, so it is adding rinses to break them down.
We'll check SUD against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- Too much detergent, or detergent that isn't high-efficiency (HE)
- Thickened no-splash bleach
- A kinked or clogged drain hose
You can usually clear it
- Let it finish. The extra rinses are normal.
- Use only HE detergent, and less of it.
- Check that the drain hose isn't kinked.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
The problem behind it
Other Whirlpool front-load washer codes
Meaning read from Whirlpool product help: error codes in front load washers and written in our own words. Last checked 11 November 2026. Maytag's support site gives the same codes with the same wording. Whirlpool notes these may not be all the codes your model can show. For any other F and E code, it says to unplug the washer for five minutes and, if the code returns, book service.