SerialPlate
SerialPlate / Error codes / Whirlpool top-load washer

Whirlpool top-load washer error codes

10 codes. 8 are ones you can usually clear yourself, and 0 are ones Whirlpool says need a technician.

Take a photo of the label

Tell us the code and we'll check it against your exact model, its age and any recalls.

CodeWhat it means
LIDThe lid was left open.
Not a fault
OFBThe load is off balance, and the washer is trying to correct it.
You can usually clear it
OLThe load is too large.
You can usually clear it
PFA power cut interrupted the cycle.
Not a fault
SUDThere are too many suds in the washer.
You can usually clear it · also shown as SD
LFThe washer is taking too long to fill.
You can usually clear it · also shown as LO FL, F8 E1
HCThe hot and cold inlet hoses are connected the wrong way round.
You can usually clear it
DRNThe washer isn't draining properly.
You can usually clear it
LDLThe lid isn't locking.
You can usually clear it
LDUThe lid can't unlock.
You can usually clear it

Worth knowing

These are for Whirlpool's high-efficiency top-load washers. Maytag's support site gives the same codes with the same wording.

Meanings read from Whirlpool product help: error codes in top load HE washers and written in our own words. Last checked 11 November 2026. Codes differ between models; your manual lists the ones for yours. Shown as: LID; OFB; OL and so on.