Whirlpool top-load washer error code DRN
The washer isn't draining properly.
We'll check DRN against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- A drain hose that was installed incorrectly
- A kinked or clogged drain hose
You can usually clear it
- Check that the drain hose isn't kinked or clogged.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
The problem behind it
Other Whirlpool top-load washer codes
LIDThe lid was left open.OFBThe load is off balance, and the washer is trying to correct…OLThe load is too large.PFA power cut interrupted the cycle.SUDThere are too many suds in the washer.LFThe washer is taking too long to fill.HCThe hot and cold inlet hoses are connected the wrong way rou…LDLThe lid isn't locking.
Meaning read from Whirlpool product help: error codes in top load HE washers and written in our own words. Last checked 11 November 2026. These are for Whirlpool's high-efficiency top-load washers. Maytag's support site gives the same codes with the same wording.