SerialPlate
SerialPlate / Problems / Refrigerator not cooling / LG

LG refrigerator not cooling

A fridge that has gone warm usually has a simple cause: the temperature was changed, a door is not sealing, the vents inside are blocked, or the coils are clogged with dust. Check those first. If the freezer is cold but the fridge is warm, or you hear a click every few minutes, a part has failed and it needs a technician. Keep the doors shut meanwhile.

Take a photo of the label

We'll work out which of these fits your exact model, and whether it is safe to fix yourself.

What a LG shows for this

If the display shows a code, it narrows the cause down. LG uses these 10 codes when a refrigerator is not cooling.

CodeWhat it meansLG says
FFThe freezer fan isn't turning.You can usually clear it
rFThe fan in the refrigerator compartment isn't turning.Needs a technician
CFThe fan that cools the compressor area at the back isn't running. The code often clears after a reset and returns about three hours later.Needs a technician
dHThe defrost system isn't working: the temperature didn't rise as expected after a defrost began.Needs a technician
FSThe freezer's temperature sensor has a fault.Needs a technician
rSThe upper temperature sensor in the refrigerator compartment has a fault.Needs a technician
r2The lower temperature sensor in the refrigerator compartment has a fault.Needs a technician
dSThe defrost sensor has a fault. The cooling plate may be iced over.Needs a technician
CHThe sensors point to a leak on the high-pressure side of the cooling circuit.Needs a technician
CLThe sensors point to a leak on the low-pressure side of the cooling circuit.Needs a technician

Codes differ between models. No code on the display? The checks below still apply.

What to check first

These are in rough order of how often they are the cause. Each can be checked without opening the refrigerator up.

  1. The temperature setting, or showroom mode. The lights work but nothing is cold at all, or the display shows a setting warmer than 37°F.
    Set the fridge to 37°F (3°C) and the freezer to 0°F (-18°C). If the lights are on but it is not cooling at all, look up how to turn off demo or showroom mode for your model.
  2. A door that is not sealing. The door drifts open, or you can feel cold air along the seal.
    Wipe the door seals with warm soapy water and make sure no shelf, drawer or bottle is holding a door open.
  3. Blocked vents inside. The fridge is packed, and food near the back wall is the only cold food.
    Move food away from the vents at the back of the fridge and freezer so air can pass between the two.
  4. Dusty condenser coils. It runs constantly and the sides feel hot. Worse with pets in the house.
    Unplug the fridge. Vacuum the dust from the grille at the bottom front and from the back, then plug it back in.
  5. No room to breathe, or a hot room. It sits tight against the wall, or in a garage in summer.
    Leave a couple of inches of space behind and above the fridge.

What needs a technician

If the checks above change nothing, it is usually one of these. They mean opening the refrigerator up, which is not a job to do yourself.

Stop and call someone if

Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.

What is normal

With the doors kept shut, food in a fridge stays safe for about four hours without cooling, and a full freezer for about two days.

More on LG

Other makers

Other refrigerator problems

The causes on this page were written with AI from general repair knowledge and have not yet been reviewed by a technician. Code meanings read from LG support: refrigerator digital and analog error codes and written in our own words. Last checked 11 November 2026. SerialPlate gives guidance, not a guarantee.