GE top-load washer error code Po
The washer took too long to pump the water out. The Rinse light may flash instead.
We'll check Po against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- A kinked, pinched or clogged drain hose
- A drain hose raised too high
- A clogged house drain
You can usually clear it
- Wait a few minutes. Many models pause up to three minutes between stages.
- Press Start, or choose Drain & Spin and press Start.
- Check the drain hose isn't kinked or flattened.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
The problem behind it
Other GE top-load washer codes
H2O SUPPLYWater isn't entering the washer. The Wash and Rinse lights m…CAnCELEdThe washer was paused for more than 24 hours, or stopped its…LIDThree cycles have been started without the lid being opened,…dEThe lid is open, which pauses the washer.UEThe load is unbalanced.FEThe water in the washer has reached a critical level.
Meaning read from GE Appliances support: washer consumer help indicator and written in our own words. Last checked 11 November 2026. These are for washers with electronic controls made in 2017 or later, and messages vary by model. The Po code is from GE's separate page on washers that won't drain, and applies from 2015.