LG dryer error code tE1
The dryer has found a problem with one of its temperature sensors.
The same meaning is also shown as tE3, tE4, tE5, tE6.
We'll check tE1 against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- A temperature sensor (thermistor) fault
Needs a technician
LG says this one needs a technician. It suggests trying this first:
- Unplug the dryer or switch off its breaker. With the power off, press and hold Start/Pause for five seconds. Restore power and run a cycle.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
The problem behind it
Other LG dryer codes
tE2A temperature sensor reading is off, usually because the dry…drnThe dryer stopped because the water it collects isn't draini…LE1The drum isn't turning.LE2There is a problem with the compressor, the part that makes …LE3There is a problem with the motor that moves air through the…IFThere is a problem with the lint filter.E1On steam models, there is a problem with the part that makes…d80Air isn't moving freely from the dryer to the outside. The n…
Meaning read from LG support: dryer error code list and written in our own words. Last checked 11 November 2026. LG wrote this list for all its dryers, so some codes apply only to certain kinds: steam models, heat-pump models, or dryers with a water container.