SerialPlate
SerialPlate / Error codes / LG dryer / tE2

LG dryer error code tE2

A temperature sensor reading is off, usually because the dryer is cold. Steam cycles can set it off.

Take a photo of the label

We'll check tE2 against your exact model, its age and any recalls, and tell you what to do next.

What it usually points to

You can usually clear it

  1. Clean the lint filter.
  2. Find the vent outlet outside and check its flap opens fully and isn't blocked by lint, snow or frost.
  3. Unplug the dryer or switch off its breaker. With the power off, press and hold Start/Pause for five seconds. Restore power and run a cycle.

These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.

Other LG dryer codes

All 29 LG dryer codes

Meaning read from LG support: dryer error code list and written in our own words. Last checked 11 November 2026. LG wrote this list for all its dryers, so some codes apply only to certain kinds: steam models, heat-pump models, or dryers with a water container.