Maytag front-load washer error code F9 E1
Draining is taking longer than it should, usually more than eight minutes.
We'll check F9 E1 against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- A kinked or clogged drain hose
- A drain hose set too high or too low
- Too many suds
You can usually clear it
- Check that the drain hose isn't kinked or clogged.
- Use only HE detergent.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
The problem behind it
Other Maytag front-load washer codes
LOCControl Lock is switched on.DETThe washer can't find a detergent cartridge in the dispenser.INTThe cycle was paused or cancelled, and the washer is still s…RLThe washer found items in the drum during the Clean Washer c…SUDThere are too many suds for the washer to spin the water out…F5 E2The door isn't locking.F7 E1The motor can't reach the speed the cycle needs.F8 E1The washer senses that water is coming in too slowly.
Meaning read from Maytag product help: error codes in front load washers and written in our own words. Last checked 11 November 2026. Maytag washers are built by Whirlpool and show the same codes. Maytag notes these may not be all the codes your model can show. For any other F and E code, it says to unplug the washer for five minutes and, if the code returns, book service.