Samsung dryer error code 3C
The dryer has found a fault with its motor.
We'll check 3C against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- A motor fault
Needs a technician
Samsung says this one needs a technician. It suggests trying this first:
- Switch the dryer off for two to three minutes, then start the cycle again.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
The problem behind it
Other Samsung dryer codes
9C1The voltage reaching the dryer isn't what it expects.bEThe dryer thinks a button on the panel is stuck or being hel…dCThere is a problem with the door, its latch, or the sensor t…tSThere is a problem with the temperature inside the dryer or …HCThe dryer is getting too hot. Less often, the heater isn't g…ACParts inside the dryer have stopped communicating with each …FCThe frequency of the power supply isn't valid.ClgAfter a Vent Blockage test: the vent is clogged.
Meaning read from Samsung support: dryer displays an error code and written in our own words. Last checked 11 November 2026. Samsung groups several spellings under one meaning. Older and newer models show the same fault with different letters. A character that looks like an upside-down F is a lowercase t.