LG dryer drum not turning
When a dryer runs but the drum does not turn, the drive belt has usually broken, and that is a technician's job. First make sure it is not just overloaded or on a rack-dry setting. If the drum spins by hand with no resistance at all, the belt has gone. Do not keep running it: the heat stays on with nothing moving.
We'll work out which of these fits your exact model, and whether it is safe to fix yourself.
What a LG shows for this
If the display shows a code, it narrows the cause down. LG uses these 2 codes when a dryer is drum not turning.
| Code | What it means | LG says |
|---|---|---|
| LE1 | The drum isn't turning. | You can usually clear it |
| bE | A problem with the drum's drive belt has stopped the drum turning. | Needs a technician |
Codes differ between models. No code on the display? The checks below still apply.
What to check first
These are in rough order of how often they are the cause. Each can be checked without opening the dryer up.
- An overloaded drum. It started with a very heavy, wet load, and the motor hums or strains.
Take half the load out and start it again. - A rack-dry or no-tumble setting. It began after someone used the drying rack or changed the cycle.
Make sure Rack Dry or a no-tumble option is off, and take out the drying rack if one is fitted. - Something jammed at the drum's edge. A scraping sound, or the drum moves a little and stops.
Unplug the dryer. Look around the front edge of the drum for a coin, a wire or a small sock caught in the gap, and lift it out if you can reach it easily.
What needs a technician
If the checks above change nothing, it is usually one of these. They mean opening the dryer up, which is not a job to do yourself.
- A broken drive belt. The motor runs and the drum spins freely by hand, with no drag.
- A worn idler pulley or drum rollers. Squealing or thumping for weeks beforehand, then the drum stopped.
- A failed motor. A hum and a hot smell, and nothing turns.
Stop and call someone if
- You smell burning.
- The dryer is hot and the drum is not moving: stop it and leave the door open.
Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
More on LG
Other makers
Other dryer problems
The causes on this page were written with AI from general repair knowledge and have not yet been reviewed by a technician. Code meanings read from LG support: dryer error code list and written in our own words. Last checked 11 November 2026. SerialPlate gives guidance, not a guarantee.