Bosch washer error code E:30 -20
The water level is higher than expected.
We'll check E:30 -20 against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- Too much detergent
- Water added by hand during the cycle
- A faulty water valve
You can usually clear it
- For foam: mix a tablespoon of fabric softener with about two cups of water and pour it into compartment II of the drawer. Don't do this with outdoor, sports or down-filled items.
- Don't add water while the washer is running.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
Other Bosch washer codes
CLChild Lock is on.E:00 -18The drain pump is blocked.E:00 -23There is water in the base of the washer, or the washer is l…E:10 -00The pump for the automatic detergent dosing system is blocked.E16The door isn't locked properly.E17Water isn't coming in properly: the inlet filters are blocke…E18The drain hose is blocked or kinked.E:30 -10The washer isn't getting the water it expects. The tap symbo…
Meaning read from Bosch owner support: washer error codes and written in our own words. Last checked 11 November 2026. Newer displays show two parts that alternate, such as E:36 and -10. For any code not listed, Bosch says to switch the washer off and on, then unplug it for 30 seconds, and call if it returns.