SerialPlate
SerialPlate / Error codes / Bosch washer / E18

Bosch washer error code E18 or F18

The drain hose is blocked or kinked.

Take a photo of the label

We'll check E18 against your exact model, its age and any recalls, and tell you what to do next.

What it usually points to

You can usually clear it

  1. Check the drain hose isn't kinked, and that it isn't raised more than about 39 inches.
  2. Clean the drain pump as your manual shows. Have towels ready: the water that comes out may be hot.

These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.

The problem behind it

Other Bosch washer codes

All 17 Bosch washer codes

Meaning read from Bosch owner support: washer error codes and written in our own words. Last checked 11 November 2026. Newer displays show two parts that alternate, such as E:36 and -10. For any code not listed, Bosch says to switch the washer off and on, then unplug it for 30 seconds, and call if it returns.