SerialPlate / Error codes / Bosch washer
Bosch washer error codes
17 codes. 14 are ones you can usually clear yourself, and 2 are ones Bosch says need a technician.
Tell us the code and we'll check it against your exact model, its age and any recalls.
| Code | What it means |
|---|---|
| CL | Child Lock is on. Not a fault |
| E:00 -18 | The drain pump is blocked. You can usually clear it |
| E:00 -23 | There is water in the base of the washer, or the washer is leaking. Needs a technician |
| E:10 -00 | The pump for the automatic detergent dosing system is blocked. You can usually clear it · also shown as E:10 -10, E:10 -20 |
| E16 | The door isn't locked properly. You can usually clear it · also shown as E34, F16, F34 |
| E17 | Water isn't coming in properly: the inlet filters are blocked or the water pressure is too low. You can usually clear it · also shown as F17, F29 |
| E18 | The drain hose is blocked or kinked. You can usually clear it · also shown as F18 |
| E:30 -10 | The washer isn't getting the water it expects. The tap symbol may show too. You can usually clear it |
| E:30 -20 | The water level is higher than expected. You can usually clear it |
| E:30 -80 | The washer isn't draining properly. You can usually clear it · also shown as E:36 -10 |
| E32 | The washer found the load unbalanced, so it skipped or slowed the spin. You can usually clear it · also shown as F32 |
| E33 | The washer detected too much foam. You can usually clear it · also shown as F33 |
| E:36 -25 | The drain pump is blocked. You can usually clear it · also shown as E:36 -26, E:38 -25, E:38 -26 |
| E:60 -2B | The laundry is unevenly spread, so the unbalanced-load protection interrupted the spin. You can usually clear it · also shown as H:32 |
| E80 | There is a fault in the motor's drive circuit. Needs a technician |
| E:92 -01 | The water pressure is low or the inlet filters are blocked. You can usually clear it |
| H9E | Hot water isn't reaching the washer. The tap symbol shows too. You can usually clear it |
Worth knowing
Newer displays show two parts that alternate, such as E:36 and -10. For any code not listed, Bosch says to switch the washer off and on, then unplug it for 30 seconds, and call if it returns.
Meanings read from Bosch owner support: washer error codes and written in our own words. Last checked 11 November 2026. Codes differ between models; your manual lists the ones for yours. Shown as: CL; E:00 -18; E:00 -23 and so on.