Bosch washer error code E:30 -80 or E:36 -10
The washer isn't draining properly.
We'll check E:30 -80 against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- A blocked or kinked drain hose
- A drain hose connected too high or extended
- A blocked drain pump or a pump cap that isn't screwed in fully
- Too much detergent
You can usually clear it
- Check the drain hose isn't kinked, and that it isn't raised more than about 39 inches.
- Clean the drain pump as your manual shows. Have towels ready: the water that comes out may be hot.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
The problem behind it
Other Bosch washer codes
CLChild Lock is on.E:00 -18The drain pump is blocked.E:00 -23There is water in the base of the washer, or the washer is l…E:10 -00The pump for the automatic detergent dosing system is blocked.E16The door isn't locked properly.E17Water isn't coming in properly: the inlet filters are blocke…E18The drain hose is blocked or kinked.E:30 -10The washer isn't getting the water it expects. The tap symbo…
Meaning read from Bosch owner support: washer error codes and written in our own words. Last checked 11 November 2026. Newer displays show two parts that alternate, such as E:36 and -10. For any code not listed, Bosch says to switch the washer off and on, then unplug it for 30 seconds, and call if it returns.