LG dryer error code nP
No current is reaching the heater. It is usually a problem with the house wiring, not the dryer.
We'll check nP against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- A tripped breaker
- A wiring or outlet fault
You can usually clear it
- Check the power cord is pushed fully into the outlet.
- Switch the dryer's breaker off at the main panel for at least 10 seconds, then on.
- If it remains, have a licensed electrician check the outlet's voltage.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
The problem behind it
Other LG dryer codes
tE1The dryer has found a problem with one of its temperature se…tE2A temperature sensor reading is off, usually because the dry…drnThe dryer stopped because the water it collects isn't draini…LE1The drum isn't turning.LE2There is a problem with the compressor, the part that makes …LE3There is a problem with the motor that moves air through the…IFThere is a problem with the lint filter.E1On steam models, there is a problem with the part that makes…
Meaning read from LG support: dryer error code list and written in our own words. Last checked 11 November 2026. LG wrote this list for all its dryers, so some codes apply only to certain kinds: steam models, heat-pump models, or dryers with a water container.