SerialPlate / Error codes / Whirlpool dishwasher
Whirlpool dishwasher error codes
17 codes. 5 are ones you can usually clear yourself, and 12 are ones Whirlpool says need a technician.
Tell us the code and we'll check it against your exact model, its age and any recalls.
| Code | What it means |
|---|---|
| F1 E1 | A fault in the control module. Needs a technician |
| F1 E2 | The main control has a communication fault. Needs a technician · also shown as F2 E2 |
| F2 E1 | A key is stuck, or the console has a fault. Needs a technician |
| F3 E2 | A fault with the water temperature sensor or the sensor that checks how dirty the water is. Needs a technician |
| F4 E2 | A fault in the heating system. Needs a technician · also shown as F4 E3 |
| F6 E1 | A fault in the control panel or the main control. Needs a technician |
| F6 E3 | The dishwasher detected too many suds, so it may not fill or wash properly. You can usually clear it |
| F6 E4 | The float switch that guards against overfilling has been set off. You can usually clear it |
| F7 E2 | A fault with the wash motor. Needs a technician |
| F8 E2 | An electrical fault with the valve that lets water in. Needs a technician |
| F8 E4 | Water was detected in the tray under the dishwasher. It starts draining and won't run. Needs a technician |
| F8 E5 | The valve that lets water in is stuck open. Needs a technician |
| F9 E1 | Draining is taking too long, or the dishwasher isn't draining. You can usually clear it |
| F9 E2 | A fault with the drain motor, or a blocked drain. You can usually clear it |
| FA E4 | A fault with the valve that switches water between the spray arms. Needs a technician · also shown as F10 E4 |
| FA E5 | The valve that switches water between the spray arms is leaking. Needs a technician · also shown as F10 E5 |
| H2O | The dishwasher isn't detecting water coming in. You can usually clear it · also shown as H20 |
Worth knowing
KitchenAid's support site gives the same codes with the same meanings. On models without a display, the Clean light flashes the code: count the first set of flashes for the F number, then after a short pause the second set for the E number.
Meanings read from Whirlpool product help: dishwasher error codes and written in our own words. Last checked 11 November 2026. Codes differ between models; your manual lists the ones for yours. Shown as: F1 E1; F1 E2 or F2 E2; F2 E1 and so on.