SerialPlate
SerialPlate / Error codes / Whirlpool dishwasher / F6 E4

Whirlpool dishwasher error code F6 E4

The float switch that guards against overfilling has been set off.

Take a photo of the label

We'll check F6 E4 against your exact model, its age and any recalls, and tell you what to do next.

What it usually points to

You can usually clear it

  1. Check the dishwasher is level. Whirlpool says a tilt can set the float switch off.
  2. Cut the power for 30 seconds: unplug the dishwasher, or switch its breaker off if it is wired in.

These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.

The problem behind it

Other Whirlpool dishwasher codes

All 17 Whirlpool dishwasher codes

Meaning read from Whirlpool product help: dishwasher error codes and written in our own words. Last checked 11 November 2026. KitchenAid's support site gives the same codes with the same meanings. On models without a display, the Clean light flashes the code: count the first set of flashes for the F number, then after a short pause the second set for the E number.