Electrolux front-load washer error code E21
The washer is draining too slowly.
We'll check E21 against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- A kinked or restricted drain hose
- Hot and cold supply hoses connected the wrong way round
You can usually clear it
- Check the drain hose for kinks.
- Check the hot and cold hoses aren't swapped.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
The problem behind it
Other Electrolux front-load washer codes
E11The washer isn't taking in water during the wash.E35The pressure sensor says there is too much water in the wash…E41The control thinks the door is open.E42The door lock isn't being detected.HO SEThe hot and cold inlet hoses are connected the wrong way rou…LOCControl Lock is on, so cycles won't start.SU dSThe washer detected too many suds and is adding rinses of ab…
Meaning read from Electrolux owner support: washer articles and written in our own words. Last checked 11 November 2026. Electrolux has a separate article for each code. If the washer was installed or moved in the last 30 days, it says to go back to the installer first.