SerialPlate
SerialPlate / Error codes / Electrolux front-load washer / E35

Electrolux front-load washer error code E35

The pressure sensor says there is too much water in the washer.

Take a photo of the label

We'll check E35 against your exact model, its age and any recalls, and tell you what to do next.

What it usually points to

You can usually clear it

  1. Press Cancel, then Start to carry on.
  2. If it returns, unplug the washer, plug it back in and restart the cycle.

These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.

Other Electrolux front-load washer codes

All 8 Electrolux front-load washer codes

Meaning read from Electrolux owner support: washer articles and written in our own words. Last checked 11 November 2026. Electrolux has a separate article for each code. If the washer was installed or moved in the last 30 days, it says to go back to the installer first.