SerialPlate
SerialPlate / Error codes / Electrolux front-load washer / HO SE

Electrolux front-load washer error code HO SE

The hot and cold inlet hoses are connected the wrong way round. The display shows HO, then SE.

First: Turn off the water to the washer.

Take a photo of the label

We'll check HO SE against your exact model, its age and any recalls, and tell you what to do next.

What it usually points to

You can usually clear it

  1. Press Cancel.
  2. Shut off both water supply valves, then attach each supply hose to the matching inlet on the washer. If the washer was just installed, the installer should do this.

These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.

Other Electrolux front-load washer codes

All 8 Electrolux front-load washer codes

Meaning read from Electrolux owner support: washer articles and written in our own words. Last checked 11 November 2026. Electrolux has a separate article for each code. If the washer was installed or moved in the last 30 days, it says to go back to the installer first.