Electrolux front-load washer error code SU dS
The washer detected too many suds and is adding rinses of about five minutes each until they clear.
We'll check SU dS against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- Too much detergent
- Detergent that isn't high-efficiency (HE)
You can usually clear it
- Use only HE detergent, and less of it.
- Run an empty Quick Wash cycle.
- Press Cancel to turn the alert off.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
The problem behind it
Other Electrolux front-load washer codes
E11The washer isn't taking in water during the wash.E21The washer is draining too slowly.E35The pressure sensor says there is too much water in the wash…E41The control thinks the door is open.E42The door lock isn't being detected.HO SEThe hot and cold inlet hoses are connected the wrong way rou…LOCControl Lock is on, so cycles won't start.
Meaning read from Electrolux owner support: washer articles and written in our own words. Last checked 11 November 2026. Electrolux has a separate article for each code. If the washer was installed or moved in the last 30 days, it says to go back to the installer first.