SerialPlate
SerialPlate / Error codes / GE dishwasher

GE dishwasher error codes

15 codes. 8 are ones you can usually clear yourself, and 5 are ones GE says need a technician.

Take a photo of the label

Tell us the code and we'll check it against your exact model, its age and any recalls.

CodeWhat it means
C1Pumping the water out during a drain has taken more than two minutes.
You can usually clear it
C2The whole pump-out has taken more than seven minutes.
You can usually clear it
C3The dishwasher will not drain.
Needs a technician
C4The dishwasher filled twice after a power cut, which points to the float or the drain.
You can usually clear it
C5The pump-out finished too quickly, as if there was little water to pump.
You can usually clear it
C6The water coming in is too cold.
You can usually clear it
C7The water temperature sensor circuit has stopped working.
Needs a technician
C8Something is stopping the detergent cup from opening fully.
You can usually clear it
PFThe power to the dishwasher was cut.
Not a fault
CUP OPENA reminder that the detergent cup hasn't been closed.
Not a fault
FTDThe dishwasher failed to drain.
You can usually clear it · also shown as F56
LEAK DETECTEDThe dishwasher has detected a possible leak and cancelled the cycle.
Needs a technician
999On models with Floor Protect, a possible leak was detected. On other models, the control needs resetting.
Needs a technician
H2OThe dishwasher isn't getting enough water.
You can usually clear it · also shown as H20
PRSThe pressure sensor is sending a signal the control can't use, so a cycle won't start or will cancel.
Needs a technician

Worth knowing

GE lists these as its most common codes. Not every code appears on every model.

Meanings read from GE Appliances support: dishwasher error, fault or function codes and written in our own words. Last checked 11 November 2026. Codes differ between models; your manual lists the ones for yours. Shown as: C1; C2; C3 and so on.