GE dishwasher error code C1
Pumping the water out during a drain has taken more than two minutes.
We'll check C1 against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- A clogged air gap
- A kinked or badly placed drain hose
- A clogged garbage disposal
You can usually clear it
- If there is an air gap on the sink, clean it out.
- Check the drain hose under the sink for kinks.
- Run the garbage disposal to clear it.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
The problem behind it
Other GE dishwasher codes
C2The whole pump-out has taken more than seven minutes.C3The dishwasher will not drain.C4The dishwasher filled twice after a power cut, which points …C5The pump-out finished too quickly, as if there was little wa…C6The water coming in is too cold.C7The water temperature sensor circuit has stopped working.C8Something is stopping the detergent cup from opening fully.PFThe power to the dishwasher was cut.
Meaning read from GE Appliances support: dishwasher error, fault or function codes and written in our own words. Last checked 11 November 2026. GE lists these as its most common codes. Not every code appears on every model.