GE dishwasher error code C4
The dishwasher filled twice after a power cut, which points to the float or the drain.
We'll check C4 against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- A float switch that is stuck or has failed
- A clogged drain or sump
You can usually clear it
- Press Start, then Cancel or Reset.
- Tap the float cover, the upside-down plastic cup in the front left of the tub floor, to free it.
- Clear any debris from the sump at the back of the tub floor.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
Other GE dishwasher codes
C1Pumping the water out during a drain has taken more than two…C2The whole pump-out has taken more than seven minutes.C3The dishwasher will not drain.C5The pump-out finished too quickly, as if there was little wa…C6The water coming in is too cold.C7The water temperature sensor circuit has stopped working.C8Something is stopping the detergent cup from opening fully.PFThe power to the dishwasher was cut.
Meaning read from GE Appliances support: dishwasher error, fault or function codes and written in our own words. Last checked 11 November 2026. GE lists these as its most common codes. Not every code appears on every model.