GE dishwasher error code C6
The water coming in is too cold.
We'll check C6 against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- Cold water sitting in the hot line
- A water heater set too low
You can usually clear it
- Run the hot tap next to the dishwasher until it runs hot before you start a cycle.
- The incoming water should be at least 120°F. Check your water heater's setting.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
Other GE dishwasher codes
C1Pumping the water out during a drain has taken more than two…C2The whole pump-out has taken more than seven minutes.C3The dishwasher will not drain.C4The dishwasher filled twice after a power cut, which points …C5The pump-out finished too quickly, as if there was little wa…C7The water temperature sensor circuit has stopped working.C8Something is stopping the detergent cup from opening fully.PFThe power to the dishwasher was cut.
Meaning read from GE Appliances support: dishwasher error, fault or function codes and written in our own words. Last checked 11 November 2026. GE lists these as its most common codes. Not every code appears on every model.