GE dishwasher error code PF
The power to the dishwasher was cut.
We'll check PF against your exact model, its age and any recalls, and tell you what to do next.
What it usually points to
- A power failure
Not a fault
- Pick your cycle and press Start. It will run normally.
These are checks you can do without opening the machine up. Don't remove panels, and don't reach inside with the power on. Smell gas, or see smoke or sparks? Stop, leave, and call 911.
Other GE dishwasher codes
C1Pumping the water out during a drain has taken more than two…C2The whole pump-out has taken more than seven minutes.C3The dishwasher will not drain.C4The dishwasher filled twice after a power cut, which points …C5The pump-out finished too quickly, as if there was little wa…C6The water coming in is too cold.C7The water temperature sensor circuit has stopped working.C8Something is stopping the detergent cup from opening fully.
Meaning read from GE Appliances support: dishwasher error, fault or function codes and written in our own words. Last checked 11 November 2026. GE lists these as its most common codes. Not every code appears on every model.