SerialPlate / Error codes / Whirlpool dryer
Whirlpool dryer error codes
17 codes. 4 are ones you can usually clear yourself, and 11 are ones Whirlpool says need a technician.
Tell us the code and we'll check it against your exact model, its age and any recalls.
| Code | What it means |
|---|---|
| AF | Air isn't flowing freely through the dryer. It keeps running, but loads take longer to dry. Some models light Check Vent instead. You can usually clear it · also shown as F4 E3 |
| L2 | The dryer is getting low voltage or none on part of its supply, so the heater may not come on. The drum keeps turning. You can usually clear it · also shown as F4 E4 |
| PF | A power failure interrupted the cycle. Not a fault |
| F3 E2 | Five loads in a row have dried without the moisture sensors getting a reading. You can usually clear it · also shown as F3 E5 |
| ERR | The door isn't completely closed and latched, so the dryer won't run. It can look shut without being latched. You can usually clear it |
| Loc | Control Lock is on, so the dryer won't start. Not a fault |
| F1 E3 | There may be a problem with the control unit or its wiring. Needs a technician · also shown as F1 E5 |
| F1 E4 | There may be a problem with the control unit or its wiring. Needs a technician |
| F2 E1 | A fault in the keypad. Needs a technician |
| F2 E2 | A fault in the keypad or the control. Needs a technician |
| F2 E4 | There may be a problem with the touch panel or its wiring. Needs a technician |
| F2 E5 | There may be a problem with the touch panel or its wiring. Needs a technician |
| F3 E1 | A fault with the temperature sensor on the exhaust. Needs a technician |
| F3 E3 | A fault with the temperature sensor on the air inlet. Needs a technician |
| F4 E1 | There may be a problem with the heater or the relays that switch it. Needs a technician |
| F6 E1 | The main control board and the touch panel have stopped communicating. Needs a technician |
| F7 E1 | There may be a problem with the motor, its control or the wiring. Needs a technician |
Worth knowing
Maytag's support site lists the same dryer codes. Whirlpool has pages for more codes than are listed here, but those pages give only a reset and don't say what the code means.
Meanings read from Whirlpool product help: dryer error codes and written in our own words. Last checked 11 November 2026. Codes differ between models; your manual lists the ones for yours. Shown as: AF or F4 E3; L2 or F4 E4; PF and so on.